Stone Carving Tools, Diamond Drill Bits and Core Drills we Do Not Sell.
We do not sell these products. The listings on this page are for information only.
We have some drill bit sets at low closeout prices on our Closeouts Page.
Call the manufacturer for more information:
Crystalite/Abrasive Technology (800) 964-8324
Crystalite Mini Flexodisc Carving and
Polishing Kit -
|
The Mini Flexodisc Kit contains
- 4 each of the rubber Mini Flexodiscs in 1/2", 1", and
1-1/2" sizes
- 4 each of the Mini Polypads in 1/2", 1", and
1-1/2" sizes
- 4 each of the Pre-Polish Mini-Crystalads in 1/2", 1", and
1-1/2" sizes
- 8 each of the Final Polish Mini-Crystalpads in 1/2", 1", and
1-1/2" sizes
- 12 mandrels
|
Crystalite Mini Flexodisc Carving and Polishing
Kit
|
|
Item #
|
Description
|
|
Mini-Flexo Kit
|
Crystalite Mini Flexodisc Kit
|
|
Designed for use with a flexible shaft tool when working on carvings
and small pieces. The pads are attached to the rubber Flexodiscs with contact
cement. Threaded mandrels are 1/8".
Polypads are for use with oxide polishes, Pre-Polish Mini-Crystalads are for use with 1200 and coarser grits of diamond compound and Final Polish Mini-Crystalpads work with diamond compound finer than 1200 grit.
Crystalpads sand and polish hard stones such as corundum,
garnet, and agate.
Polypads polish softer stones such as opal and turquoise.
|
|
Flexodiscs are also available as singles.
|
Please do not contact us about this product.
Call the manufacturer for information:
Crystalite/Abrasive Technology (800) 964-8324
Drill Bits and Core Drills
|
Crystalite offers two types of drill bits:
Crystalite standard plated drill bits and Crystalite Triple Ripple Drill bits.
Triple Ripple bits cut more aggressively and tend to last longer than standard bits.
They work best at 5,000 to 20,000 RPM.
Must be used with water cooling.
|
|
Crystalite Standard Drill Bits
|
|
Size
|
Description
|
|
|
0.75mm
|
Package of 6, 25 or 100
|
|
|
1.0mm
|
Package of 6, 25 or 100
|
|
|
1.25mm
|
Package of 6, 25 or 100
|
|
|
1.5mm
|
Package of 6, 25 or 100
|
|
|
2.0mm
|
Package of 6, 25 or 100
|
|
|
2.5mm
|
Package of 6, 25 or 100
|
|
|
Standard
Kit
|
One each: 1.0, 1.25, 1.5, 2 and 2.5mm
|
|
|
Value Pack
|
Two each: 1.0, 1.25 and 1.5mm
|
|
Please do not contact us about this product.
Call the manufacturer for information:
Crystalite/Abrasive Technology (800) 964-8324
|
|
Crystalite Triple Ripple Drill Bits
|
|
Size
|
Description
|
|
0.75mm
|
Package of 6, 25 or 100
|
|
1.1mm
|
Package of 6, 25 or 100
|
|
1.4mm
|
Package of 6, 25 or 100
|
|
1.8mm
|
Package of 6, 25 or 100
|
|
2.1mm
|
Package of 6, 25 or 100
|
|
Duo Pack
|
Three each: 1.1 and 1.4mm
|
Please do not contact us about this product.
Call the manufacturer for information:
Crystalite/Abrasive Technology (800) 964-8324
|
|
Crystalite Core Drills (Core drills are for creating larger holes.)
|
|
Outside Diameter
|
Inside Diameter
|
Shank
|
|
0.35mm
|
0.64" / 1.63mm
|
1/8"
|
|
1/4"
|
0.156" / 4.0mm
|
3/16"
|
|
5/16"
|
0.223" / 5.7mm
|
3/16"
|
|
3/8"
|
0.283" / 7.2mm
|
1/4"
|
|
7/16"
|
0.343" / 8.7mm
|
1/4"
|
|
1/2"
|
0.403" / 10.2mm
|
1/4"
|
|
9/16"
|
0.473" / 12.0mm
|
1/4"
|
|
5/8"
|
0.533" / 13.5mm
|
1/4"
|
|
11/16"
|
0.968" / 24.6mm
|
1/4"
|
|
3/4"
|
0.653" / 16.6mm
|
1/4"
|
|
1"
|
0.903" / 22.9mm
|
5/16"
|
|
1-1/2"
|
1.403" / 35.6mm
|
3/8"
|
|
1-3/4"
|
1.653" / 42.0mm
|
3/8"
|
|
2"
|
1.903" / 48.33mm
|
3/8"
|
|
2-1/4"
|
2.156" / 54.8mm
|
3/8"
|
|
3"
|
2.903" / 73.7mm
|
3/8"
|
|
3-1/2"
|
3.403" / 86.4mm
|
3/8"
|
|
4"
|
3.903" / 99.1mm
|
3/8"
|
Please do not contact us about this product.
Call the manufacturer for information:
Crystalite/Abrasive Technology (800) 964-8324
|
|
ORDER