 ORDER |
Ten inch saws allow you to slice pieces of rough up to about 3 inches in thickness into slabs. Generally, the harder and denser the material being cut, the thicker the blade, because the extra blade thickness helps increase cutting speed.
We only sell the Covington Slab saws listed on another page. Slab Saws
Slab saws allow you to slice large pieces of cabbing rough into slabs. They have larger diameter blades than trim saws, and the blades also tend to be thicker than those used on trim saws. The extra blade thickness helps increase cutting speed.
We carry saws that will accommodate blades 10" on up. We only sell saws by Covington Engineering.
For 10" saws, click here.
We do not sell the slab saw listed below.
It is listed as an informational service.
Diamond Pacific:
|
Diamond Pacific TR slab saws have a very large vise. Diamond Pacific TR saws have the following features:
. . |
 |
| Diamond Pacific Saws feature a hydraulic feed. The hydraulic feature
even brings the vise back to the front of the saw, when the lever is pulled to the return position. |
 |
 |
A vise with large capacity is a nice feature in all Diamond Pacific slab saws. Soda not included with saw. |
|
Small handles make for difficult tightening of a workpiece in the vise as well as moving the vise toward and away from the blade. The vise assembly is pushed into the blade as it rides on a 3-point V-Guide Rail System. |
 |
| MODEL |
BLADE
Capacity |
Shipping WEIGHT
|
VISE
Opening |
Cross
Feed |
H.P. |
Maximum Depth of Cut |
| TR-18 | 18" | 670 lb. | 8" | 6-1/2" | 1 |
6-1/4""
|
| TR-24 | 24" | 890 lb. | 18" | 8" | 1-1/2 | 9" |
| TR-36 | 36" | 2000 lb. | 25 | 11-1/2" | 3 |
14"
|
Note, crating charges apply for these saws.
|
ORDER |
| Copyright by ColorWright - All Rights Reserved. Our Privacy Policy. | Toll Free Order Line FOR ORDERS ONLY (877) 548-1439 or Email Us |