Saw Blades
We stock many blades for faceting saws, trim saws,
10" and 14" slab saws, but we can supply you with blades up to 36 inches
in diameter. Contact
Us to inquire or order. Pro-Slicer
Blades: Pro-Slicer blades are thin core fast cutting
blades. The 4" and 6" sizes can be used with water coolant on most stones.
For slabbing, trimming agates and jaspers or other heavy cutting jobs, you should
use an oil-based coolant. Oil provides better cooling properties, which will give
you longer blade life. Super thin blades should be run at 3450 RPM.
We stock all Pro-Slicer blades!
| Pro-Slicer
Blades | | Description
| Arbor Hole |
List Price | Our
Price | | 4"
Diameter .004" Thick (.007" kerf) |
1/2" |
$28.10 |
$22.50 |
| 4" Diameter .004"
Thick (.007" kerf) | 5/8"
| $28.10 |
$22.50 |
| 4" Diameter .012"
Thick (.016" kerf) | 1/2"
| $28.10 |
$22.50 |
| 4" Diameter .012"
Thick (.016" kerf) | 5/8"
| $28.10 |
$22.50 |
| 6" Diameter .006"
Thick (.009" kerf) | 1/2" |
$34.60 |
$26.00 |
| 6" Diameter .006"
Thick (.009" kerf) | 5/8" |
$34.60 |
$26.00 |
6" Diameter .012"
Thick (.016" kerf)
| 1/2" |
$34.60 |
$26.00 |
| 6" Diameter .012"
Thick (.016" kerf) | 5/8"
| $34.60 |
$26.00 |
| 6" Diameter .025"
Thick (.032" kerf) | 1/2" |
$38.90 |
$29.75 |
| 6" Diameter .025"
Thick (.032" kerf) | 5/8"
| $38.90 |
$29.75 |
| 8" Diameter .012"
Thick (.016" kerf) | 5/8" |
$49.70 |
$38.00 |
| 8" Diameter .025"
Thick (.032" kerf) | 5/8"
| $49.70 |
$38.00 |
| 10" Diameter .015"
Thick (.019" kerf) | 5/8" |
$69.15 |
$54.00 |
| 10" Diameter .032"
Thick (.040" kerf) | 5/8"
| $69.15 |
$54.00 |
Pro-Slicer Gorilla
Blades: Pro-Slicer Gorilla blades have coarser diamond
than standard Pro-Slicer blades. They are extremely fast cutting blades and last
longer than standard Pro-Slicers. Six inch Gorilla blades can be used with
water coolant on most stones, but we suggest using an oil-based coolant such as
Lapidary Oil to extend the life of your blades. For slabbing or other heavy cutting
jobs and for longer blade life, an oil coolant is a must. Super thin blades should
be run at 3450 RPM. We stock
all Gorilla Pro-Slicer blades!
| Gorilla
Pro-Slicer Blades | |
Description | Arbor Hole |
List Price | Our
Price | | 6"
Diameter .012" Thick (.019" kerf) |
1/2" |
$45.15 |
$35.00 |
| 6" Diameter
.012" Thick (.019" kerf) | 5/8" |
$45.15 |
$35.00 |
| 8" Diameter .012"
Thick (.019" kerf) | 5/8" |
$66.55 |
$50.50 |
| 10" Diameter .015"
Thick (.022" kerf) | 5/8" |
$87.95 |
$68.50 |
Smart Cut Sintered Blades These
new blades have diamond throughout the edge and cut aggressively. What makes
them stand apart from other sintered blades is the diamond is oriented in the
blade for the most aggressive cutting action. Smart Cut blades also last
a long time, because the diamond isn't just plated on top of the rim. Instead,
diamond particles are incorporated into the actual metal of the rim. Smart
Cut blades up to 10" in diameter work great with wate, but we advise using
an additive such as Lube Cool 4800. If you use oil, these long-lasting blades
will last even longer! Smart Cut blades
have a continuous rim. We stock all
Smart Cut blades up to 18" in size!
|
Smart Cut Sintered Blades |
| Description |
Arbor Hole | List Price |
Our Price | |
4" Diameter .014" Thick |
1/2" |
$56.00 |
$42.00 |
| 4" Diameter .014"
Thick | 5/8"
| $56.00 |
$42.00 |
| 4" Diameter .020"
Thick |
1/2"
or 5/8"
| $60.00 |
$42.75 |
| 6" Diameter .014"
Thick | 1/2"
| $64.00 |
$44.25 |
| 6" Diameter .014"
Thick | 5/8"
| $64.00 |
$44.25 |
| 6" Diameter .020"
Thick |
1/2"
or 5/8"
| $68.00 |
$46.50 |
| 6" Diameter .032"
Thick |
1/2"
or 5/8"
| $70.00 |
$48.00 |
| |
| Smart
Cut Sintered Blades | |
Description | Arbor Hole |
List Price | Our
Price | | 8"
Diameter .025" Thick | 5/8"
| $82.00 |
$58.00 |
| 8" Diameter .032"
Thick | 5/8"
| $82.00 |
$58.00 |
10" Diameter .032"
Thick
|
5/8"
| $120.00 |
$88.75 |
| 10" Diameter .040"
Thick | 5/8"
| $110.00 |
$79.50 |
| 12" Diameter .051"
Thick |
3/4
or 1"
| $188.00 |
$136.50 |
| 14" Diameter .051"
Thick |
3/4
or 1"
| $226.00 |
$168.75 | | 18" Diameter .0941"
Thick |
3/4
or 1"
| $422.00 |
$315.00 |
|
Economy Blades: We carry a
line of econony blades that is similar to Raytech Blazer Blades. Four types
of blades are available: Silver blades have a notched construction on
a thin core for cutting more precious material. Similar to Blue Blazer. Black
blades are sintered and have more diamond for the tougher work needed in cutting
dense material like agate. Similar to Black Blazer. Red blades are
sintered continuous rim blades with a heavy concentration of fine diamond on a
thin core. Similar to Yellow Blazer, but better price. Green
blades are notched rim blades for general lapidary such as slabbing. Similar to
Green Blazer. We suggest using an oil-based coolant
such as Lapidary Oil to extend the life of your blades. Heavy cutting jobs
require the use of an oil-based coolant. We
stock all Economy blades!
| Silver blades
Extra thin plated blades for trimming soft and expensive materials. |
| Description | Arbor
Hole | Our Price |
| 4" Diameter .006" Thick (.009
kerf) | 5/8" with 1/2" bushing
| $5.00 |
| 4" Diameter .010" Thick (.013
kerf) | 5/8" with 1/2" bushing
| $5.00 |
| 5" Diameter .006" Thick (.009 kerf) |
5/8" with 1/2" bushing | $5.50 |
| 5" Diameter .010" Thick (.013 kerf) |
5/8" with 1/2" bushing | $5.50 |
| 6" Diameter .006" Thick (.009 kerf) |
5/8" with 1/2" bushing | $6.00 |
| 6" Diameter .010" Thick (.013 kerf) |
5/8" with 1/2" bushing | $6.00 |
| 6" Diameter .012" Thick (.015 kerf) |
5/8" with 1/2" bushing | $6.00 |
| |
|
Black blades Extra
thick sintered blades for hard materials. | | Description | Arbor
Hole | Our Price |
| 6" Diameter .031" Thick (.044 kerf) |
5/8" with 1/2" bushing |
$46.00 |
| 8" Diameter .031" Thick (.044 kerf) |
5/8" | $55.00 |
| 10" Diameter .040" Thick (.052 kerf) |
5/8" | $64.25 |
| 12" Diameter .050" Thick (.070 kerf) |
5/8" with 1/2" bushing |
$82.50 |
| 14" Diameter .050" Thick (.070 kerf) |
5/8" | $101.00 |
| | | |
| | | |
|
|
Red blades Medium
thin sintered blades for general cutting. | | Description | Arbor
Hole | Our Price |
| 4" Diameter .016" Thick (.023 kerf) |
5/8" with 1/2" bushing |
$22.00 |
| 6" Diameter .012" Thick (.015 kerf) |
5/8" with 1/2" bushing |
$34.00 |
| 8" Diameter .023" Thick (.031 kerf) |
5/8" with 1/2" bushing |
$57.00 |
| 10" Diameter .031" Thick (.038 kerf) |
5/8" with 1/2" bushing |
$77.00 |
| 12" Diameter .031" Thick (.042 kerf) |
5/8" with 1/2" bushing |
$106.50 |
| 14" Diameter .039" Thick (.042 kerf) |
5/8" | $135.00 |
| |
|
Green blades Medium
thick notched rim blades for slabbing and general cutting. |
| Description | Arbor
Hole | Our Price |
| 6" Diameter .025" Thick (.031 kerf) |
5/8" with 1/2" bushing |
$14.50 |
| 8" Diameter .025" Thick (.031 kerf) |
5/8" with 1/2" bushing |
$18.50 |
| 10" Diameter .031" Thick (.044 kerf) |
5/8" with 1/2" bushing |
$31.25 |
| 12" Diameter .040" Thick (.060 kerf) |
1" with 5/8" bushing |
$46.00 |
| 14" Diameter .051" Thick (.067 kerf) |
1" with 3/4" bushing |
$73.50 |
| 16" Diameter .059" Thick (.088 kerf) |
1" with 3/4" bushing |
$110.00 |
| 18" Diameter .059" Thick (.088 kerf) |
1" with 3/4" bushing |
$138.50 |
| 20" Diameter .071" Thick (.098 kerf) |
1" with 3/4" bushing |
$165.00 |
| 24" Diameter .071" Thick (.098 kerf) |
1" with 3/4" bushing |
$238.50 | | 30" Diameter .098" Thick (.112 kerf) |
1" with 3/4" bushing |
$504.50 | | 36" Diameter .098" Thick (.115 kerf) |
1" with 3/4" bushing |
$734.00 |
|
Raytech Blazer Blades:
Raytech blades fit most saw arbors, because they come with a bushing. Yellow Blazer
blades are sintered blades with a heavy concentration of fine diamond on a thin
core. We
suggest using an oil-based coolant such as Lapidary Oil to extend the life of
your blades. Heavy cutting jobs require the use of an oil-based coolant.
We are discontinuing
all Raytech Blades. Get them at our low, low closeout prices while they
last!
|
Raytech Yellow Blazer blades
| | Description |
Arbor Hole | List Price |
Our Price |
| 4" Diameter .012" Thick (.020 kerf) |
1/2" & 5/8" | $37.00 |
$33.50 | | 4" Diameter .016" Thick (.023 kerf) |
1/2" & 5/8" | $45.00 |
$40.50 |
| 6" Diameter .012" Thick (.015 kerf)
| 1/2" & 5/8" |
$68.00 |
$61.25 |
| 6" Diameter .012" Thick (.020 kerf) |
1/2" & 5/8" | $55.00 |
$49.50 |
| 6" Diameter .016" Thick (.023 kerf) |
1/2" & 5/8" | $55.00 |
$49.50 |
| MK/Barranca
Blades: We no longer sell Barranca or MK 297, 301 and 303 blades.
Blade Dressing Sticks:
When your diamond blade acts sluggish and cuts slowly, don't
throw it out. Instead, cut into a blade dressing stick a few times. The
special aluminum oxide of these dressing sticks unclogs the cutting edge of your
blade and exposes new diamond. In a few seconds, your old blade will be
cutting like new. |
Blade Dressing Stick
| | Description | Price |
| 1/2" x 1/2" x 6" (for trim saws) |
$3.75 |
| 2" x 2" x 6" (for slab saws) |
$16.75 | Check
out our Coolants
|