 ORDER |
We only sell LapidaryPro Diamond Powder and Compound, and oxide polishes which are on another page.
Diamond Powder:
Synthetic diamond is more uniform in shape, size and quality than natural diamond.
Diamond Powder is used to charge copper, bronze, tin, BATT and other laps. We suggest using 50,000 to 200,000 grit for polishing and 3,000 and 8,000 for pre-polishing. Overseas cutters use 14,000 grit as a final polish. We think 14,000 is best used to create a superfine pre-polish.
| Standard Diamond Powder: |
|
| Note: we are discontinuing Standard Diamond Powder, but still have some grits available on our Closeout Page. | |
| Standard Diamond Powder | ||||
| Grit: | Size: | |||
| 100,000 grit
(1/4 micron) |
5 carats and 100 carat sizes | |||
| 50,000 grit (1/2 micron) | 5
carats and 100 carat sizes | |||
| 14,000 grit (1 micron) |
5 carats and 100 carat sizes | |||
| 8,000 grit (3 micron) |
5 carats and 100 carat sizes | |||
| 3,000 grit (6 micron) |
5 carats and 100 carat sizes | |||
| 1,200 grit (15 micron) |
5 carats and 100 carat sizes | |||
| 600 grit (30 micron) |
5 carats and 100 carat sizes | |||
| 325 grit (45 micron) |
5 carats and 100 carat sizes | |||
| 220 grit (60 micron) |
5 carats and 100 carat sizes | |||
| 180 grit (900 micron) |
| |||
| 100 grit (150 micron) |
5 carats and 100 carat sizes | |||
Crystalite
Diamond Spray:
Each container of Crystalite Diamond Spray has 6 carats of diamond in an alcohol base. The spraying action is done by a pump, so it contains no harmful CFCs.
| Crystalite Diamond Spray | ||
| Grit: | Size: | |
| 100,000 (1/4 micron) | 6 carats | |
| 50,000 (1/2 micron) | 6 carats | |
| 14,000 (1 micron) | 6 carats | |
| 8,000 (3 micron) | 6 carats | |
| 3,000 (6 micron) | 6 carats | |
Crystalite Diamond Compound:
Crystalite Diamond Compound is combined with a vaseline-like carrier and packaged in a plastic syringe for easy application. The syringes also guard against contamination. We stock all grits of diamond compound.
| Crystalite Diamond Compound | ||
| Grit: | Size: | |
| 100,000 (1/4 micron) | 1 and 5 gram sizes | |
| 50,000 (1/2 micron) | 1 and 5 gram sizes | |
| 14,000 (1 micron) | 1 and 5 gram sizes | |
| 8,000 (3 micron) | 1 and 5 gram sizes | |
| 3,000 (6 micron) | 1 and 5 gram sizes | |
| 1,200 (15 micron) | 1 and 5 gram sizes | |
| 600 (30 micron) | 1 and 5 gram sizes | |
| 325 (45 micron) | 1 and 5 gram sizes | |
| 240 (60 micron) | 1 and 5 gram sizes | |
Note: we are discontinuing Crystalite Diamond Compound,
but still have some grits available on our Closeout
Page.
Diamond Superpolish Compound Sticks -
| This diamond compound is more expensive, but it's similar to but drier than LapidaryPro, which is best you can get. A tiny amount of it is all that's needed to get the job done. Only available in 2000 grit (Green). | ||||||||||||||
| |||||||||||||||
Note: we are discontinuing Superpolish Diamond Compound, but still have 2000 grit available on our Closeout Page.
Crystalite
50,000 Diamond Slurry:
Crystalite Diamond Slurry is ready to go and easy to use.
| 50,000 Diamond Slurry | ||
| Description: | Size: | |
| 50,000 Grit Slurry | 5 carats | |
Raytech Extender Fluid:
Raytech Thinner/Lubricant is used for thinning diamond compound and diamond spray. It also serves as a lubricant.
| Raytech Extender Fluid | ||
| Description: | Size: | |
| Raytech Extender | 4 ounces | |
Tin Oxide:
Tin Oxide is used for polishing a wide variety of cabbing materials. Some problem stones respond better to Tin Oxide than other polishing agents. Tin Oxide should be 99.9% pure.
|
ORDER |
| Copyright by ColorWright - All Rights Reserved. Our Privacy Policy. | Toll Free Order Line FOR ORDERS ONLY (877) 548-1439 or Email Us |